Toshiba Satellite M20 Maintenance Manual Download Page 179

Page: 179 / 296

4.5 Keyboard

4 Replacement Procedures

4.5 Keyboard

Removing the Keyboard

Remove the keyboard according to the following procedures and Figures 4-16 and 4-17.

CAUTION

: To avoid fingernail damage, do not pull out the keyboard holder by clamping

it with your fingernails.

1. Open the display panel.

2. Remove the keyboard lock and M2.5x2 black bind screws.

3. Move the keyboard in the direction of the arrow until the keyboard connector appears.

Figure 4-16 Removing the keyboard lock and screws

4. Disconnect the keyboard cable from CN18 on the system board and remove the

keyboard.

Satellite M20 Maintenance Manual

4-27

Summary of Contents for Satellite M20









































































































































































































































































































Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands

Toshiba Satellite M20, Maintenance Manual

Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands