Toshiba SATELLITE L310 User Manual Download Page 155

Page: 155 / 224

User’s Manual

8-3

Optional Devices

Removing an ExpressCard

To remove the ExpressCard, follow the steps below.
1. Click the

Safety Remove Hardware

icon on the Task Bar.

2. Click the ExpressCard you want to remove.
3. Press the ExpressCard once to extend it.
4. Grasp the extended ExpressCard, and remove it.

Removing the ExpressCard

■

Before removing an ExpressCard, make sure that any applications or

system services do not use the card.

■

Be sure to disable the ExpressCard prior to removing it. Otherwise, the

system may be fatally damaged.

ExpressCard

Eject button

Summary of Contents for SATELLITE L310

































































































































































































































Search results

Summary of Contents for SATELLITE L310

Reviews:

Related manuals for SATELLITE L310

Brands by name

Popular brands

Toshiba SATELLITE L310, User Manual

Search results

Summary of Contents for SATELLITE L310

Reviews:

Related manuals for SATELLITE L310

Brands by name

Popular brands