Toshiba PTM70U-00C007 User Manual Download

Page: 164 / 244

7-2

User’s Manual

HW Setup & BIOS Setup

General

This window displays the BIOS version and contains two buttons:

Default

and

About

Setup

This field displays

BIOS Version

and date.

Display

This tab lets you customize your computer’s display settings for either the

internal LCD screen or an external monitor.

Power On Display

Lets you select the display to be used when the computer is booted (This

setting is only available on Standard VGA mode and is not available on

Windows Desktop properties).

Default

Return all HW Setup values to the factory

settings.

About

Display the HW Setup version.

Auto-Selected

Selects an external monitor if one is connected.

Otherwise, it selects the internal LCD (Default).

LCD + Analog RGB

Selects both the internal LCD and external

monitor for simultaneous display.

System LCD Only

Selects the internal LCD even if the external

monitor is connected.

If the connected external monitor does not support the computer’s current

video mode, selecting the LCD + Analog RGB mode will not display any

image on the external monitor.
When Windows starts up, the screen will be displayed on the external

monitor if it was connected when the notebook was previously switched off

and is still connected when the computer is switched on. Otherwise, the

screen will be displayed on the internal LCD.

Summary of Contents for PTM70U-00C007





















































































































































































































































Search results

Summary of Contents for PTM70U-00C007

Reviews:

Related manuals for PTM70U-00C007

Brands by name

Popular brands

Toshiba PTM70U-00C007, User Manual

Search results

Summary of Contents for PTM70U-00C007

Reviews:

Related manuals for PTM70U-00C007

Brands by name

Popular brands