background image

User’s Manual

G-3

Legal Footnotes

Hard Disk Drive (HDD) Capacity

*5

1 Gigabyte (GB) means 10

9

 = 1,000,000,000 bytes using powers of 10. The 

computer operating system, however, reports storage capacity using 
powers of 2 for the definition of 1 GB = 2

30

 = 1,073,741,824 bytes, and 

therefore shows less storage capacity. Available storage capacity will also 

be less if the product includes one or more pre-installed operating systems, 

such as Microsoft Windows and/or pre-installed software applications, or 

media content. Actual formatted capacity may vary.

LCD

*6

Over a period of time, and depending on the usage of the computer, the 

brightness of the LCD screen will deteriorate. This is an intrinsic 

characteristic of LCD technology.
Maximum brightness is only available when operating in AC power mode. 

The screen will dim when the computer is operated on battery power and 

you may not be able to increase the brightness of the screen.

Graphics Processor Unit (“GPU”)

*7

Graphics processor unit (“GPU”) performance may vary depending on 

product model, design configuration, applications, power management 

settings and features utilized. GPU performance is only optimized when 

operating in AC power mode and may decrease considerably when 

operating in battery power mode.

Wireless LAN

*8

The transmission speed over the wireless LAN and the distance over which 

wireless LAN can reach may vary depending on surrounding 

electromagnetic environment, obstacles, access point design and 

configuration, and client design and software/hardware configurations.
[54Mbps is the theoretical maximum speed under the IEEE802.11 (a/b/g) 

standard.] The actual transmission speed will be lower than the theoretical 

maximum speed.

Copy Protection

*9

Copy protection technology included in certain media may prevent or limit 

recording or viewing of the media.

Images

*10

All images are simulated for purposes of illustration.

Summary of Contents for PTM70U-00C007





















































































































































































































































Reviews: