Toshiba PTM70U-00C007 User Manual Download

Page: 167 / 244

User’s Manual

7-5

HW Setup & BIOS Setup

HDD Priority Options

If more than one HDD is installed in the computer, this option lets you set

the priority for HDD detection. If the first detected HDD has a boot

command, the system will boot from the HDD.

Network Boot Protocol

This feature sets the protocol to remotely boot from the network.

[PXE]

Sets PXE as the protocol (Default).

[RPL]

Sets RPL as the protocol.

USB Memory BIOS Support Type

Set the type of the USB memory as a startup device.

Keyboard

Wake-up on Keyboard

When this feature is enabled and the computer is in Standby Mode, you

can turn on the computer by pressing any key. It is effective only for the

internal keyboard and only when the computer is in Standby Mode.

Built-in HDD ->

USB (Default)

The priority is set as Built-in HDD -> USB.

USB -> Built-in

HDD

The priority is set as USB -> Built-in HDD.

■

If a boot command is not found on the first detec

ted HDD, the system

will not boot from the other HDD. It will search the next device in the

boot priority for a boot command.

■

Some modules may not be displayed.

Network Boot Protocol is not displayed for Gigabit Ethernet LAN.

HDD

Set the type of the USB memory to be equivalent

to the HDD (Default).
* Based on the [HDD] order in the [Boot Priority

Options] item. The order with respect to the other

HDD can be set in the [HDD Priority Options]

item.

FDD

Set the type of the USB memory to be equivalent

to the FDD.
* Based on the [FDD] order in the [Boot Priority

Options] item.

Enabled

Enables the Wake-up on Keyboard function.

Disabled

Disables the Wake-up on Keyboard function (Default).

Summary of Contents for PTM70U-00C007





















































































































































































































































Search results

Summary of Contents for PTM70U-00C007

Reviews:

Related manuals for PTM70U-00C007

Brands by name

Popular brands

Toshiba PTM70U-00C007, User Manual

Search results

Summary of Contents for PTM70U-00C007

Reviews:

Related manuals for PTM70U-00C007

Brands by name

Popular brands