Toshiba PTM70U-00C007 User Manual Download

Page: 134 / 244

4-46

User’s Manual

Operating Basics

Details

To open the Details window, click the Setup Detail button in the TOSHIBA

HDD Protection Properties window.

Details

Detection Level Amplification

When the AC adaptor is disconnected or the lid is closed, HDD Detection

assumes that the computer will be carried and sets the detection level to

the maximum for 10 seconds.

TOSHIBA HDD Protection Message

Specify whether to display a message when TOSHIBA HDD Protection is

active.

Heat dispersal

To protect from overheating, the CPU has an internal temperature sensor. If

the computer’s internal temperature rises to a certain level, the cooling fan

is turned on or the processing speed is lowered. You can select whether to

control the CPU temperature by turning on the fan first, then if necessary,

lowering the CPU speed. Or, by lowering the CPU speed first, then if

necessary, turning on the fan. Use the Cooling Method item of the Basic

Setup tab in TOSHIBA Power Saver.
When the CPU temperature falls to a normal range, the fan is turned off

and the CPU operation returns to standard speed.

■

This function does not work when the computer is starting, in standby,

in hibernation, in transition to hibernation, recovering from hibernation,

or powered off. Be sure to not subject the computer to vibration or

impact while the function is disabled.

■

This function only operates with Windows

XP.

If the CPU temperature reaches an unacceptably high level with either

setting, the system automatically shuts down to prevent damage. Data in

memory will be lost.

Summary of Contents for PTM70U-00C007





















































































































































































































































Search results

Summary of Contents for PTM70U-00C007

Reviews:

Related manuals for PTM70U-00C007

Brands by name

Popular brands

Toshiba PTM70U-00C007, User Manual

Search results

Summary of Contents for PTM70U-00C007

Reviews:

Related manuals for PTM70U-00C007

Brands by name

Popular brands