Toshiba Portege M400-144 User Manual Download Page 129

Page: 129 / 255

User’s Manual

5-8

The Keyboard

Numeric mode

To turn on the Numeric mode, press

F11

. The Numeric mode indicator

lights. Now try numeric data entry using the keys.
Press

F11

again to turn off the overlay.

The numeric keypad overlay

Temporarily using normal keyboard (overlay on)

While using the overlay, you can temporarily access the normal keyboard

without turning off the overlay:
1. Hold

and press any other key. All keys will operate as if the overlay

was off.

2. Type upper-case characters by holding

Shift

and pressing a

character key.

3. Release

to continue using the overlay.

Temporarily using overlay (overlay off)

While using the normal keyboard, you can temporarily use the keypad

overlay without turning it on:
1. Press and hold down

2. Check the keyboard indicators. Pressing

turns on the most recently

used overlay. If the Numeric mode indicator lights, you can use the

overlay for numeric entry. If the Arrow mode indicator lights, you can

use the overlay for cursor and page control.

3. Release

to return to normal keyboard operation.

Summary of Contents for Portege M400-144
































































































































































































































































Search results

Summary of Contents for Portege M400-144

Reviews:

Related manuals for Portege M400-144

Brands by name

Popular brands

Toshiba Portege M400-144, User Manual

Search results

Summary of Contents for Portege M400-144

Reviews:

Related manuals for Portege M400-144

Brands by name

Popular brands