Toshiba L70-C Page 34 User Manual Download

Page: 34 / 125

Chapter 3

The Grand Tour

This chapter identifies the various components of the computer. It is
recommended that you become familiar with each before you operate the
computer.

Legal Footnote (Non-applicable Icons)
For more information regarding Non-applicable Icons, refer to the

Legal

Footnotes

section.

Handle your computer carefully to avoid scratching or damaging the
surface.

Front with the display closed

The following figure shows the front of the computer with the display panel
in the closed position.

Figure 3-1 Front of the computer with display panel closed

1. DC IN/Battery indicator

2. Wireless communication indicator

DC IN/Battery
indicator

The

DC IN/Battery

indicator shows the condition

of the DC IN and the battery charge status. White
indicates that the battery is fully charged while
the power is being correctly supplied from the AC
power adaptor.
Refer to the

Power Condition Descriptions

section for more information on this feature.

Wireless
communication
indicator

The

Wireless communication

indicator glows

amber when the Bluetooth or Wireless LAN
functions are turned on.
Only some models are equipped with Bluetooth
and Wireless LAN functions.

User's Manual

3-1

Summary of Contents for L70-C






























































































































Search results

Summary of Contents for L70-C

Reviews:

Related manuals for L70-C

Brands by name

Popular brands

Toshiba L70-C, User Manual

Search results

Summary of Contents for L70-C

Reviews:

Related manuals for L70-C

Brands by name

Popular brands