Toshiba Gigashot GSC-R30, Owner'S Manual

Page: 80 / 267

80
Setting the Still Image Size
* 1GB= 1 billion bytes. The actual formatted capacity may be lower than the figure shown
here.
1
From the recording menu, use the jog dial to select [STILL
IMAGE SIZE] and press the OK button.
The available image sizes are displayed along with the
number of available shots for each size.
2
Use the jog dial to select the image size and press the OK
button.
The selected image size is set and the recording menu
reappears.
To cancel the setting, press the MENU button.
2M : 1600
✕
1200 pixels
1.2M : 1280
✕
960 pixels
0.3M : 640
✕
480 pixels
When you select [SHQ(WIDE)], [HQ(WIDE)] or [SP(WIDE)] as the video quality, the
still image sizes are as follows:
2M : 1600
✕
900 pixels
1.2M : 1280
✕
720 pixels
0.3M : 640
✕
360 pixels
Approximate Number of Available Shots for Still Images
The table below shows the approximate number of still images that may be stored
on to the camera's hard disk drive and SD cards. Because the amount of data used
varies depending on the size of each image, the number of storable images listed
below is approximate and may vary.
Still image
size
Hard disk drive SD card
60GB*
(GSC-R60)
30GB
(GSC-R30)
2GB 1GB 512MB 256MB 128MB
2M 32,000 30,508 2,056 1,036 515 237 119
1.2M 32,000 32,000 3,427 1,728 859 396 199
0.3M 32,000 32,000 10,282 5,184 2,578 1,189 599
CONTINUOUS RECORDING
VIDEO QUALITY
STILL IMAGE SIZE
WHITE BALANCE
ISO SENSITIVITY
EXIT
1.2 M
■
RECORDING MENU
STILL IMAGE SIZE
CANCEL
2974
2M