Toshiba Gigashot GSC-R30 Owner'S Manual Download Page 114

Page: 114 / 267

114

Removing Protection

MEMO

• Images with DPOF settings are indicated by the [

] icon and cannot be

unprotected. To unprotect such images, first clear the DPOF settings.
See “Clearing DPOF Settings”

p.121.

From the play menu, select [PROTECT] and press the OK
button.

Use the jog dial to select the image to be unprotected and
press the OK button.

The [

] icon (black) below the protected image

disappears.
To retain the protection, press the OK button again.
To unprotect multiple images, repeat this procedure.

Move the OK button to

to select [OK] and press the OK

button.

The protection is removed and the play menu reappears.
To cancel the procedure, select [CANCEL] and press the OK button.

To Unprotect all the Images in an Album

In step 2, move the OK button to

to select [CLEAR ALL] and then press the OK

button.

PROTECT

PREVIOUS ALBUM

SELECT ALL

CLEAR ALL

CANCEL

RELEASE

101-0001

Summary of Contents for Gigashot GSC-R30












































































































































































































































































Search results

Summary of Contents for Gigashot GSC-R30

Reviews:

Related manuals for Gigashot GSC-R30

Brands by name

Popular brands

Toshiba Gigashot GSC-R30, Owner'S Manual

Search results

Summary of Contents for Gigashot GSC-R30

Reviews:

Related manuals for Gigashot GSC-R30

Brands by name

Popular brands