Toshiba GD-1220 Operator'S Manual Download Page 90

Page: 90 / 262

3 ADVANCED FUNCTIONS

88 Function Keys

Enter the time (hours/min-
utes) and day (DD) using
the digital keys and press
the [ENTER] button.

To correct the entered value,
highlight the character using the

button and enter the correct

value.

To switch "AM" to "PM" or vice
versa, highlight the value using
the

button and press the

button. (Default time

format is 12 hour time system.
To change the time format to 24
hour time system, see

Opera-

tor's Manual for Copying
Functions

"AM/PM" is not displayed on the
equipment with 24 hour time
system adopted.

If you enter time or day value
which does not actually exist,
"DELAYED TRANSMIT" screen
appears again on pressing the
[ENTER] button.

To cancel this function, press the
[FUNCTION CLEAR] or [CAN-
CEL] button to return to the Fax
basic screen.

Place the original(s) and
specify the remote Fax then
start transmission.

Keypad Dialing (Direct Entry with
Digital Keys):

P.47

One Touch Key Dialing:

P.48

Abbreviated Dialing:

P.50

Alphabet Dialing:

P.51

If you leave the equipment in this
status for 45 seconds or longer,
the setting returns to the default,
and also the screen returns to
the default mode basic screen.

DELAYED TRANSMIT
TIME : HH:MM DD

08:10AM 1

ENTER TEL NUMBER(MAX128):
2006-04-10 12:43

M: 100%

COMM.OPTION

RESOLUTION:STANDARD

Summary of Contents for GD-1220







































































































































































































































































Search results

Summary of Contents for GD-1220

Reviews:

Toshiba GD-1220, Operator'S Manual, Page: 90 / 262

Search results

Summary of Contents for GD-1220

Reviews: