Toshiba GD-1220 Operator'S Manual Download Page 166

Page: 166 / 262

5 ENTERING & SETTING ITEMS

164 Entering the Remote Fax Number

To set communication options

1. Select "5. COMM OPTIONS" using

the

button and press the

[ENTER] button.

2. Select "2. ON" using the

button and press the [ENTER] but-
ton.

When you do not specify any
option, select "1. OFF".

The screen to select the commu-
nication options appears.
1. COMPLETE
2. DELAYED TRANSMIT

(

P.87)

3. TX REPORT (

P.223)

4. LINE MONITOR (

P.79)

5. QUALITY TX (

P.90)

6. SUB ADDRESS (

P.98)

3. Select "1. COMPLETE" using the

button and press the

[ENTER] button.

Returns to the screen to register
One Touch key.

Select “1. COMPLETE”
using the

button

and press the [ENTER] but-
ton.

If "NAME" or "TEL NUMBER"
has not been registered, the
screen on the right appears for
about 2 seconds with the alarm
buzzer and returns to the screen
to register One Touch key.

ONE TOUCH KEY

001

1.COMPLETE
2.NAME

3.TEL NUMBER
4.2nd TEL NUMBER

5.COMM. OPTIONS

COMM. OPTIONS
1.OFF

2.ON

COMM. OPTIONS

1.COMPLETE

2.DELAYED TRANSMIT

3.TX REPORT
4.LINE MONITOR
5.QUALITY TX
6.SUB ADDRESS

ONE TOUCH KEY

3.TEL NUMBER
4.2nd TEL NUMBER

5.COMM. OPTIONS

COMM. OPTIONS

1.COMPLETE

2.DELAYED COMM.

3.TX REPORT

ONE TOUCH KEY

1.COMPLETE

2.NAME

3.TEL NUMBER

ONE TOUCH KEY

No destination

Summary of Contents for GD-1220







































































































































































































































































Search results

Summary of Contents for GD-1220

Reviews:

Toshiba GD-1220, Operator'S Manual, Page: 166 / 262

Search results

Summary of Contents for GD-1220

Reviews: