manualshive.com logo in svg

Toshiba GD-1220, Operator'S Manual, Page: 127 / 262

Share
Download
Toshiba GD-1220 Operator'S Manual Download Page 127

Mailbox Communication    125

8

Reserving the document starts.

Retrieving (Polling) a document from a confidential / bulletin 
board mailbox (remote hub)

How to retrieve a document from a confidential box or bulletin board box in a remote hub unit is 
explained here.

7

Enter the password with 
the digital keys, if the pass-
word has been set on the 
bulletin board, and press 
the [ENTER] button.

y

To input the data into the confidential mailbox, it is not required to enter a pass-

word.

y

If you make a mistake, press one of the following keys to correct the mistake. For 
key locations of [BACKSPACE], [DELETE] and [INSERT], see the following page.

 

 P.29 “Keyboard”

[CLEAR/STOP] key:
Pressing this key clears all of the values that you entered.
[BACKSPACE] key:
Each press of this key deletes the values that you are entering one by one.
[DELETE] key:
Pressing this key after highlighting the value with the key deletes the value.
[INSERT] key:
Pressing this key permits the insertion of a desired character before (in front of) an 
existing character highlighted by the cursor. Press this key again to exit the Insert 
mode.

y

If the password entered is not 
correct, the screen on the right 
appears for about 2 seconds and 
returns to the screen to enter a 
password.

1

Press the [FAX] button on 
the control panel.

2

Press the 

 key.

y

"MAILBOX" screen appears.

INPUT(BULLETIN BOARD)
MAILBOX NUMBER(MAX20):

INPUT (BULLETIN BOARD)

Invalid number

MAILBOX

1.CONFIDENTIAL

2.BULLETIN BOARD

3.RELAY

Summary of Contents for GD-1220







































































































































































































































































Reviews:

No comments