manualshive.com logo in svg

Toshiba GD-1220, Operator'S Manual, Page: 161 / 262

Share
Download
Toshiba GD-1220 Operator'S Manual Download Page 161

Entering the Remote Fax Number    159

2. Select "2. ON" using the 

 or 

  

button and press the [ENTER] but-
ton.

y

When you do not specify any 
option, select "1. OFF".

y

The screen to select the commu-
nication options appears.
1. COMPLETE
2. DELAYED TRANSMIT 

(

 

 P.87)

3. TX REPORT (

 

 P.223)

4. LINE MONITOR (

 

 P.79)

5. QUALITY TX (

 

 P.90)

6. SUB ADDRESS (

 

 P.98)

3. Select "1. COMPLETE" using the  

 or 

 button and press the 

[ENTER] button.

y

Returns to the screen to enter an 
abbreviated number.

9

Select “1. COMPLETE” 
using the 

 or 

 button 

and press the [ENTER] but-
ton.

y

If "NAME" or "TEL NUMBER" 
has not been registered, the 
screen on the right appears for 
about 2 seconds with the alarm 
buzzer and returns to the screen 
to enter an abbreviated number.

10

Press the desired One 
Touch key.

y

If One Touch key is not required, 
press the [ENTER] button.

COMM. OPTIONS
1.OFF

2.ON

COMM. OPTIONS

1.COMPLETE

2.DELAYED TRANSMIT

3.TX REPORT
4.LINE MONITOR
5.QUALITY TX
6.SUB ADDRESS

5.COMM. OPTIONS

COMM. OPTIONS

1.COMPLETE

ABB. NUMBER

4.2nd TEL NUMBER

3.TEL NUMBER

001

2.DELAYED TRANSMIT
3.TX REPORT

ABB. NUMBER

1.COMPLETE

2.NAME

3.TEL NUMBER

001

ABB. NUMBER

No destination

001

ABB. NUMBER
PRESS ONE TOUCH KEY
TO ENTER OR

[ENTER]:TO SKIP

001

Summary of Contents for GD-1220







































































































































































































































































Reviews:

No comments