manualshive.com logo in svg

Toshiba GD-1220, Operator'S Manual, Page: 129 / 262

Share
Download
Toshiba GD-1220 Operator'S Manual Download Page 129

Mailbox Communication    127

Printing a document from a confidential / bulletin board 
mailbox (local hub)

How to retrieve a document from a confidential box or bulletin board box in a local hub unit is 
explained here.

y

To retrieve the data from the bulletin board box, it is not required to enter a pass-

word.

y

If you make a mistake, press one of the following keys to correct the mistake. For 
key locations of [BACKSPACE], [DELETE] and [INSERT], see the following page.

 

 P.29 “Keyboard”

[CLEAR/STOP] key:
Pressing this key clears all of the values that you entered.
[BACKSPACE] key:
Each press of this key deletes the values that you are entering one by one.
[DELETE] key:
Pressing this key after highlighting the value with the key deletes the value.
[INSERT] key:
Pressing this key permits the insertion of a desired character before (in front of) an 
existing character highlighted by the cursor. Press this key again to exit the Insert 
mode.

7

Specify the remote Fax and 
start reception.

y

Keypad Dialing (Direct Entry with 
Digital Keys): 

 

 P.47

y

One Touch Key Dialing: 

 

 P.48

y

Abbreviated Dialing: 

 

 P.50

y

Alphabet Dialing: 

 

 P.51

y

Group Dialing: 

 

 P.53

1

Press the [FAX] button on 
the control panel.

2

Press the 

 key.

y

"MAILBOX" screen appears.

POLL(CONFIDENTIAL)
ENTER TEL NUMBER OR,
PRESS SPEED DIAL KEY
OR ONE TOUCH KEY

MAILBOX

1.CONFIDENTIAL

2.BULLETIN BOARD

3.RELAY

Summary of Contents for GD-1220







































































































































































































































































Reviews:

No comments