Toshiba GD-1220, Operator'S Manual, Page: 43 / 262

About Originals 41
When using the Automatic Document Feeder (optional) or
Reversing Automatic Document Feeder (optional)
When the originals are placed on the Automatic Document Feeder (optional) or Reversing Auto-
matic Document Feeder (optional), the uppermost page is the first to be scanned and sent.
When the Reversing Automatic Document Feeder (optional) is installed, you can scan
and send two-sided originals.
P.81 “Sending Two-sided Originals”
1
After aligning the edges of
originals, place them with
their face up and slide the
guides to the width of the
originals.
y LT/A4 size originals are rotated
90 degrees so that they are sent
as LT-R/A4-R originals.
y You cannot mix different sizes of
originals such as LD (A3) and LT
(A4).
y When LD, LG, LT-R, COMP, A3,
A4-R, B4 or B5 originals are
placed as shown in the figure on
the right, the pre-entered sender
information is printed in the area
shown A in the figure and sent to
the remote Fax.
y To enter the sender information,
see
P.203 “Registering the
Terminal ID”.
y When LT or A4 originals are
placed as shown in the figure on
the right, the pre-entered sender
information is printed in the area
shown B in the figure and sent to
the remote Fax.
A
B