Toshiba GD-1210, Operator'S Manual

Page: 34 / 190

2 SENDING A FAX
32 About Originals
When using the Reversing Automatic Document Feeder
(optional)
When the originals are placed on the Reversing Automatic Document Feeder, the uppermost
page is the first to be scanned and sent.
1
After aligning the edges of originals,
place them with their face up and
slide the guides to the width of the
originals.
y LT/A4 size originals are rotated 90 degrees
so that they are sent as LT-R/A4-R originals.
y If a mixture of LD and LT, A3 and A4, or B4
and B5 originals are placed, they are sent in
their original sizes.
y To set the originals with different width, see
P.36 “Sending different width originals”.
y When LD, LG, LT-R, COMP, A3 and B4, A4-
R, B5 originals are placed as shown in the
figure on the right, the pre-entered sender
information is printed in the shaded position
shown A in the figure and sent to the remote
Fax.
y Entering the sender information ( P.154
“Registering the Terminal ID”)
y When LT, ST-R, A4, A5-R or B5-R originals
are placed as shown in the figure on the right,
the pre-entered sender information is printed
in the shaded position shown B in the figure
and sent to the remote Fax.
A
B