Toshiba GD-1210 Operator'S Manual Download Page 99

Page: 99 / 190

Mailbox Communication 97

If you want to send the relay destination transmission report, press
the [YES] button.

If you press the [NO] button here, steps 10 and 11 are not necessary.

For the relay destination transmission report, see (

P.126 “Automatically Printing

Lists & Reports”).

Specify the remote Fax to receive the relay destination transmis-
sion report from the address book or by a direct dialing (with the
digital keys).

Only one remote Fax can receive this report.

To change the selected remote Fax, delete it and specify a new one.

Confirm that the registered information is correct, and then press
the [ENTER] button.

The mailbox has been set.

Summary of Contents for GD-1210































































































































































































Search results

Summary of Contents for GD-1210

Reviews:

Related manuals for GD-1210

Brands by name

Popular brands

Toshiba GD-1210, Operator'S Manual

Search results

Summary of Contents for GD-1210

Reviews:

Related manuals for GD-1210

Brands by name

Popular brands