Toshiba e-STUDIO28 Operator'S Manual Download Page 99

Page: 99 / 130

INST

ALLING THE

PRINTER DRIVER

Installing the Printer Driver for Novell Printing

PREPARATIONS:

Before installing the printer driver for Novell printing, please make sure the following:

• The GA-1040 printer is connected to the network and turned on the power.

P13 “CONNECTING TO THE NETWORK”

• The TCP/IP setting is completed correctly. (Required only when you want to use TopAccess

or using the printer with NetWare server 5.x in the TCP/IP network.)

P16 “SETTING UP THE TCP/IP”

• The IPX/SPX and NetWare settings are completed correctly.

P34 “SETTING UP THE IPX/SPX AND NETWARE”

SUPPLEMENT:

When you want to install the Agfa Monotypo Font Manager 2000, you should install it separately.

P107 “Installing the Agfa Monotype Font Manager 2000”

The procedure to Install the printer driver for Novell printing is different depending on the version of the

Windows.

P98 “Windows 95/98/Me”

P103 “Windows NT 4.0/2000/XP”

Summary of Contents for e-STUDIO28


































































































































Search results

Summary of Contents for e-STUDIO28

Reviews:

Toshiba e-STUDIO28, Operator'S Manual, Page: 99 / 130

Search results

Summary of Contents for e-STUDIO28

Reviews: