Toshiba e-STUDIO28 Operator'S Manual Download Page 103

Page: 103 / 130

101

INST

ALLING THE

PRINTER DRIVER

Select “Yes” to print a test page and click on
[Finish].

Change the name if desired, select whether
using this printer as a default printer, and click
on [Next].

NOTE:

When installing the printer driver for Novell printing for Windows 95/98/Me, only one printer driver

can be installed for one print queue by operating the installation in this method. If you want to

install another printer driver for Novell printing, install the printer driver by Add Printer Wizard and

set the NetWare print queue to the printer port.

: The PostScript option, PS3 Upgrade (GE-1020) or PS3 & HDD Upgrade (GE-1030), is

required to use the PostScript Driver.

Summary of Contents for e-STUDIO28


































































































































Search results

Summary of Contents for e-STUDIO28

Reviews:

Related manuals for e-STUDIO28

Brands by name

Popular brands

Toshiba e-STUDIO28, Operator'S Manual

Search results

Summary of Contents for e-STUDIO28

Reviews:

Related manuals for e-STUDIO28

Brands by name

Popular brands