Toshiba e-STUDIO28 Operator'S Manual Download Page 94

Page: 94 / 130

Installing the Printer Driver for IPP Printing

PREPARATIONS:

Before installing the printer driver for IPP printing, please make sure the following:

• The GA-1040 printer is connected to the network and turned on the power.

P13 “CONNECTING TO THE NETWORK”

• The TCP/IP setting is completed correctly.

P16 “SETTING UP THE TCP/IP”

• The TCP/IP protocol is installed and configured correctly on your Windows 2000.

The IPP printing is available only for Windows 2000 and Windows XP. To install the printer driver for

IPP printing, install the printer driver by Add Printer Wizard.

SUPPLEMENT:

When you want to install the Agfa Monotypo Font Manager 2000, you should install it separately.

P107 “Installing the Agfa Monotype Font Manager 2000”

Click on [Start] and select [Printers] in
[Settings].

• When using the Windows XP, click on [start] and

select [Printers and Faxes].

• The Printers folder is opened.

REQUIREMENTS:

• The TCP/IP protocol is installed and configured correctly on your Windows 2000/XP.

• You must log in Windows as a user who has the “Administrators” or “Power Users” privilege.

Summary of Contents for e-STUDIO28


































































































































Search results

Summary of Contents for e-STUDIO28

Reviews:

Related manuals for e-STUDIO28

Brands by name

Popular brands

Toshiba e-STUDIO28, Operator'S Manual

Search results

Summary of Contents for e-STUDIO28

Reviews:

Related manuals for e-STUDIO28

Brands by name

Popular brands