background image

100

8

Click on [OK].

9

Select the printer driver that compatible to
your GA-1040 printer and click on [Next].

• When the GA-1040 printer is an US version, which

the default paper size type is LT system, select

“TOSHIBA e-STUDIO45srs-PCL6UC” (when you

install the PCL6 printer driver) or “TOSHIBA e-

STUDIO45srs-PS3UC” (when you install the

PostScript printer driver).

• When the GA-1040 printer is an European version,

which the default paper size type is A4 system, select

“TOSHIBA e-STUDIO45srs-PCL6EU” (when you

install the PCL6 printer driver) or “TOSHIBA e-

STUDIO45srs-PS3EU” (when you install the

PostScript printer driver).

7

Locate the directory where the printer driver
for Windows 95/98/Me is located, select the
“oemsetup.inf” file, and click on [OK].

• When you want to install the PCL6 printer driver,

locate  “[CD-ROM drive]:\English\Prntdrvr\Pcl6_drvr

\Win_9x_ME”.

• When you want to install the PostScript printer driver,

locate  “[CD-ROM drive]:\English\Prntdrvr\Ps_drvr

\Win_9x_ME”.

5

Click on [Browse...].

• The Locate File screen appears.

6

Insert the CD-ROM into the CD-ROM drive.

• When inserting the CD-ROM, the installer may

automatically start.  Click on [Cancel] to exit the

installer and continue the operation.

Summary of Contents for e-STUDIO28



































































































































Reviews: