Toshiba e-STUDIO28, Operator'S Manual, Page: 48 / 130

46
SETTING UP THE APPLETALK
When you print from a Macintosh computer using the printer, you should enable the AppleTalk.
PREPARATION:
Before setting up the AppleTalk, please make sure the following:
• The TCP/IP has been configured to enable the TopAccess.
You can set up the AppleTalk using TopAccess or the Control Panel on the printer.
• Some settings cannot be operated from the Control Panel. When you want set items for further
particulars, set up from TopAccess.
P47 “Setting up from TopAccess”
• When you do not have the TCP/IP network to use TopAccess, set up from the Control Panel on the
printer.
P49 “Setting up from Control Panel”
NOTE:
The AppleTalk has already been enabled as a factory default. Operate the settings only when
you want to set an AppleTalk zone that the printer belongs or AppleTalk is currently disabled.
When you want to set an AppleTalk zone, you must set using TopAccess.
: The PostScript option, PS3 Upgrade (GE-1020) or PS3 & HDD Upgrade (GE-1030), is
required for printing from a Macintosh computer.