Toshiba e-STUDIO28 Operator'S Manual Download Page 117

Page: 117 / 130

115

INST

ALLING THE

PRINTER DRIVER

INSTALLING THE PRINTER DRIVER (Macintosh)

Installing the Printer Driver to Macintosh

To install the printer driver to Macintosh, follow the procedure below:

• Installing the AdobePS 8.7 to your Macintosh computer.

P115 “Installing the AdobePS 8.7”

• Creating the PostScript printer for the GA-1040 printer on your Macintosh computer.

P117 “Creating the AdobePS Printer”

Installing the AdobePS 8.7

Insert the CD-ROM into the CD-ROM drive.

• The User Software icon appears on the desktop.

Open the “English” folder in the CD-ROM and
double-click on “AdobePS 8.7 Installer”
included in the “Printer Driver” folder.

• The AdobePS 8.7 installation begins.

SUPPLEMENT:

If the AdobePS is already installed on your computer, please make sure the version of AdobePS

is 8.7 or later. To check the version of AdobePS on your computer, select the AdobePS file

located in the “Extensions” folder under the “System Folder”. Then click on [File], select [General

Information] in [Get Info]. The information of the AdobePS file is displayed and you can check

the version of the AdobePS file.

: The PostScript option, PS3 Upgrade (GE-1020) or PS3 & HDD Upgrade (GE-1030), is

required for printing from a Macintosh computer.

Summary of Contents for e-STUDIO28


































































































































Search results

Summary of Contents for e-STUDIO28

Reviews:

Toshiba e-STUDIO28, Operator'S Manual, Page: 117 / 130

Search results

Summary of Contents for e-STUDIO28

Reviews: