background image

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his

own expense.

WARNING:

Changes or modification made to this equipment, not expressly approved by Toshiba Tec or parties authorized by

Toshiba Tec could void the user’s authority to operate the equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conformé à la norme NMB-003 du Canada.

For European models only:

WARNING:

This product complies with Class A for network connection. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.

1.

Do not touch the connector terminal when disconnecting the cables of peripheral equipment.

2.

Before opening any covers or removing any units from the copier, discharge the static electricity from your
body by touching a metal part of the copier.

This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-
marking is TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH Carl-Schurz-Str. 7, 41460 Neuss, Germany.
e-mail: [email protected]

No part of this manual may be copied in whole or part without permission.

The contents of this manual may change without notification.

Trademarks described in this manual:

Ethernet is a registered trademark of US Xerox Corporation.

The official name of Windows 95 is Microsoft Windows 95 Operating System.

The official name of Windows 98 is Microsoft Windows 98 Operating System.

The official name of Windows Me is Microsoft Windows Millennium Edition Operating System.

The official name of Windows 2000 is Microsoft Windows 2000 Operating System.

The official name of Windows XP is Microsoft Windows XP Operating System.

Microsoft, Windows, Windows NT, Microsoft Internet Explorer, and the brand names and product names of other Microsoft products are

trademarks or registered trademarks of US Microsoft Corporation in the US and other countries.

Apple, AppleTalk, Macintosh, Mac OS, and LaserWriter are trademarks of US Apple Computer Inc. in the US and other countries.

Postscript and Postscript Logo are trademarks of Adobe Systems Incorporated.

IBM PC/AT is a registered trademark of US International Business Machine Corporation.

Agfa Font Manager is the trademark of Agfa Monotype Corporation.

Fiery, the Fiery logo are trademarks registered in the U.S. Patent and Trademark Office. NetWise is a trademark of Electronics For Imaging,

Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

Pentium and Celeron are trademarks or registered trademarks of Intel Corporation.

Other company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Summary of Contents for e-STUDIO28



































































































































Reviews: