Toshiba e-STUDIO2500c, Service Manual, Page: 203 / 402

10
May 2006 © TOSHIBA TEC e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 15
[A-2] Hinge assembly
(5) Open the side cover.
(6) Remove 2 screws. Lift up the bypass unit
and take it off toward you.
Note:
When installing the bypass unit, make sure
that the ADU is closed in advance since the
bypass unit occasionally does not slide
smoothly.
Fig. 10-11
(1) Take off the bypass unit.
P.10-14 "[A-1] Bypass unit"
(2) Disconnect 1 connector and release the har-
ness from the harness clamp.
Fig. 10-12
(3) Release the spring from the hook.
Note:
Release it while the tray is standing so as to
weaken the tension of the spring.
Fig. 10-13
Bypass unit
Connector