Toshiba e-STUDIO2500c, Service Manual, Page: 105 / 402

4
May 2006 © TOSHIBA TEC e-STUDIO2500c/3500c/3510c GENERAL OPERATION
4 - 11
(C) Misfeed in equipment
• Exit sensor (S26) detects jamming of the leading edge of paper
Registration motor (M19) turned ON
Fig. 4-3
Approx 1.6 sec.
Exit sensor (S26) turned ON
If the exit sensor (S26) is not turned ON after
approx 1.6 seconds,
Paper jam (E010) The copying operation
is stopped.
• Exit sensor (S26) detects jamming of the trailing edge of paper
Registration motor (M19) turned OFF
Fig. 4-4
Approx 1.7 sec.
Exit sensor (S26) turned OFF
If the exit sensor (S26) is not turned OFF after
approx 1.7 seconds,
Paper jam (E020) The copying operation
is stopped.
• Immediately after the power ON
Any of all sensors on paper transport path detects paper (ON)
Paper jam (E030)
• Front cover is opened during copying
Paper jam (E410)
• Registration sensor (S28) detects jamming of the leading edge of paper:
The registration sensor (S28) is not turned ON in a fixed period of time after the leading edge of
paper passed the transport roller.
Paper jam (E120, E200, E210, E300, E330 and E3C0)
Registration clutch
ON
0
ON
Approx 1.6 sec.
Paper jam (E010)
Exit sensor
Timer
Registration clutch
Exit sensor
Timer
ON
OFF
Approx 1.7 sec.
Paper jam (E020)