Toshiba e-STUDIO181, Service Handbook

Page: 75 / 226

2
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO181/211
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 53
949 General Automatic interruption
page setting during printing
ALL 0
<0-100>
SYS Sets the automatic
interruption page.
1
970 User
interface
Sound setting when
switching to Energy Saving
Mode
ALL JPN: 0
Other: 1
<0-1>
SYS 0: OFF
1: ON
1
971 General Toner near empty
threshold value
ALL 1
<0-3>
SYS Performs adjustment
for the toner near-
empty detection timing.
0: Toner near empty
threshold value
(long)
1: Toner near empty
threshold value
(standard)
2: Toner near empty
threshold value
(short)
3: Toner near-empty
detection disabled
1
975 General Job handling when printing
is short paid with coin
controller
ALL 1
<0-1>
M Sets whether printing is
to be paused or
stopped when the
prepaid balance runs
out during printing.
0: Pause printing and
wait for additional
payment.
1: Stop printing and
cancel the accepted
print job.
1
1372 Counter Heater and energizing time
accumulating counter
Display/0 clearing
ALL 0
<8 digits>
M Counts up the heater
control time
accumulated (when
power of the equipment
is ON) but does not
count at the Sleep
Mode.
1
1378 Counter Counter for period of time
fuser unit is at ready
temperature
ALL 0
<8 digits>
M Counts up the heater
control time
accumulated (when the
equipment is at ready
status).
1
1380 Counter Counter for period of time
fuser unit is at printing
temperature
ALL 0
<8 digits>
M Counts up the heater
control time
accumulated (during
printing).
1
1382 Counter Counter for period of time
fuser unit is at energy
saving temperature/
Counter reset
ALL 0
<8 digits>
M Counts up the heater
control time
accumulated (when the
equipment is in the
Energy Saving Mode).
1
1385 Counter Number of output pages
(Thick paper 1)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON.
1
1386 Counter Number of output pages
(Thick paper 2)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON.
1
1388 Counter Number of output pages
(OHP film)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON.
1
Setting mode (08)
Code
Classific
ation
Items
Funct
ion
Default
<Accept
able
value>
RAM Contents
Proce
dure