Toshiba e-studio 28 Operator'S Manual Download Page 91

Page: 91 / 166

5-4

USING THE SPECIAL FUNCTIONS

2. COPYING MIXED-SIZED ORIGINALS

Set the original(s).

Page 2-6

• LD and LT sized originals or LG and LT originals can be

mixed.

Press the PROGRAM key to enter the program

menu. Then, press the MIXED ORIGINAL SIZES key.

• If the key for the desired function is not shown, press the

Pre key to switch the screen.

When using the optional reversing automatic document feeder, different-sized originals can be copied at
the same time in this copying mode, if their widths are the same.

* Do not set originals whose widths are different.

* Bypass copying is not possible.

Press the SET key.

Select either the Automatic Paper Selection or Au-

tomatic Magnification Ratio mode and other copy

modes as required.

• To make duplex copies, select the automatic magnification

mode.

Press the

START key.

Summary of Contents for e-studio 28







































































































































































Search results

Summary of Contents for e-studio 28

Reviews:

Related manuals for e-studio 28

Brands by name

Popular brands

Toshiba e-studio 28, Operator'S Manual

Search results

Summary of Contents for e-studio 28

Reviews:

Related manuals for e-studio 28

Brands by name

Popular brands