Toshiba e-studio 28 Operator'S Manual Download

Page: 26 / 166

1-13

About 30 seconds later, the copier will become ready

for copying.

• This message appears on the message panel:

READY

3. TURNING ON THE POWER SWITCH

Turning ON the Power Switch/Auto Job Start

Turning ON the Power Switch

Open the cover and turn ON the main power switch.

• This message appears on the message panel of the Basic

Screen:

Wait Warming Up

Auto Job Start

While the copier is warming up, place the original on the glass,

select the desired copy modes and press the

START key.

The copier starts scanning the originals.

READY

When this message appears, copying will automatically start.

Tip

Up to 5 jobs can be stored in the memory. Place the originals for
the 6th job on the original glass or the reversing automatic docu-
ment feeder (optional) and press the START key. The follow-
ing message will appear:

Auto Start

To clear this status, press the FUNCTION CLEAR or the

CLEAR/STOP key.

Summary of Contents for e-studio 28







































































































































































Search results

Summary of Contents for e-studio 28

Reviews:

Related manuals for e-studio 28

Brands by name

Popular brands

Toshiba e-studio 28, Operator'S Manual

Search results

Summary of Contents for e-studio 28

Reviews:

Related manuals for e-studio 28

Brands by name

Popular brands