15
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 51
15.5.42 Original width detection sensor-1 (SR6)
15.5.43 Original registration sensor (SR5)
15.5.44 Original exit sensor (SR12)
(1) Take off the feeder lower guide unit.
P.15-49 "15.5.39 Feeder lower guide unit"
(2) Disconnect 1 connector. Lift the actuator,
release 2 latches and take off the original
width detection sensor-1.
Fig. 15-123
(1) Take off the feeder lower guide unit.
P.15-49 "15.5.39 Feeder lower guide unit"
(2) Disconnect 1 connector. Release 2 latches
and take off the original registration sensor.
Fig. 15-124
(1) Take off the assembly of the exit guide and
the exit/reverse guide.
P.15-22 "15.5.11 Exit guide / Exit/reverse
(2) Remove 2 screws and take off the 2 leaf
springs.
Fig. 15-125
Original width detection sensor-1
Original registration sensor