Toshiba DP-5550, Service Manual, Page: 296 / 404

e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
FUSER UNIT
13 - 22
[E] Upper separation finger unit / Upper separation finger
(4) Open 2 clamps and remove 2 connectors.
(5) Remove 2 screws and take off the bracket.
Fig. 13-25
Note:
When installing the bracket, be sure that the
harnesses are not caught.
(6) Pull out the IH coil.
Note:
When installing the IH coil, be sure that the
marks "C" and "S" of the power supply
harnesses come at the left side.
Fig. 13-26
(1) Take off the fuser unit
( P.13-17 "[B] Fuser unit").
(2) Take off the cleaning web unit
( P.13-18 "[C] Cleaning web unit /
Cleaning web").
(3) Remove 2 screws to take off the fuser unit
front cover.
(4) Remove 2 stepped screws. Then take off the
upper separation finger unit and a crank
bracket by sliding them to the rear side.
Fig. 13-27
Bracket
Clamp
Connector
Screw
IH coil
C(Blue)
S(Red)
Black
Crank plate
Upper separation finger unit Screw Screw