High-Wall Type
Installation Manual
– 32 –
Toshiba
EN
▼
Centrally control the system by connecting to the TCC-LINK central control system.
Setting central control addresses
When connecting air conditioners of the SDI series to the TCC-LINK central control system for central
control using this product, set the addresses of indoor units using the following procedure.
Completion of
ELECTRIC WORK construction
The system performs the address setup
automatically after power-on.
Change line addresses.
If automatic address setup has not been performed
successfully, set addresses manually.
* Refer to
"Manual address setup procedure"
.
System power ON
Automatic address setup
Line address manual setting/change
Are indoor units under group control?
Are all indoor units under central control set to
header units (group address = 1)?
Set indoor units under central control to header units again,
and set those that are out of central control to follower units again.
Set central control addresses
End
No
Yes
Yes
No
* Refer to
“Manual address setup procedure”
.
* Refer to the manual of the central control system.
32-EN
+001111052201_00Ta.book Page 32 Friday, November 20, 2009 11:45 AM
Summary of Contents for Carrier RAV-SP180KRT-UL
Page 86: ......
Page 87: ......
Page 88: ...1111052201 Toshiba 001111052201_00Ta book Page 87 Friday November 20 2009 11 45 AM ...
