High-Wall Type
Installation Manual
– 30 –
Toshiba
EN
How to set the SW01
1. Remove the front panel.
• Before removing the front panel, direct the
horizontal louver to the direction shown in the
figure below.
• Remove the screws securing the front panel, and
detach it from the indoor unit.
2. Remove the drain guide and disconnect the
ground wire, TCJ sensor, TC sensor, and
motor lead (louver motor, fan motor).
3. Remove the screws and detach the electric
parts box.
4. Remove the electric parts box cover and
set bit1 of SW01 on the board to ON.
(Do not touch SW02 as it is used for other
setting.)
TC sensor
Ground wire
30-EN
+001111052201_00Ta.book Page 30 Friday, November 20, 2009 11:45 AM
L
2
S
L
1
U
3
U
4
A
B
Drain guide
Screw
Fan motor
lead
Louver
motor lead
Screw
(For fixing the
electric parts box)
TCJ sensor
Summary of Contents for Carrier RAV-SP180KRT-UL
Page 86: ......
Page 87: ......
Page 88: ...1111052201 Toshiba 001111052201_00Ta book Page 87 Friday November 20 2009 11 45 AM ...
