manualshive.com logo in svg

Toshiba B-EP2DL Series, System Mode Manual

The Toshiba B-EP2DL Series Option Installation Manual is a comprehensive guide that provides step-by-step instructions for installing various options on your Toshiba B-EP2DL printer. This manual can be easily downloaded for free from our website, allowing you to utilize all the features of your printer effortlessly.

Share
Download
background image

EO13-33005 

 

 4.9  Interface Setting----------------------------------------------------------------------------------------------------4-78 

 4.9.1 

Interface 

Setting 

Operation Example ----------------------------------------------------------------------- 4-78 

 4.9.2 

IrDA 

Setting ------------------------------------------------------------------------------------------------------- 4-81 

 4.9.3 

USB 

Serial 

Number Setting ----------------------------------------------------------------------------------- 4-83 

 4.9.4 

RS-232C Setting ------------------------------------------------------------------------------------------------- 4-84 

 4.9.5 

Bluetooth Setting------------------------------------------------------------------------------------------------- 4-85 

 4.9.6 

Wireless 

LAN Setting ------------------------------------------------------------------------------------------- 4-88 

 4.10 BASIC Setting ---------------------------------------------------------------------------------------------------- 4-111 

 

4.10.1  BASIC Setting Operation Example -------------------------------------------------------------------------4-111 

 4.10.2 

BASIC 

Interpreter 

Setting (BASIC ENABLE) ------------------------------------------------------------4-112 

 

4.10.3  BASIC File Browser (FILE MAINTENANCE) ------------------------------------------------------------4-113 

 

4.10.4  BASIC Trace Setting (BASIC TRACE) --------------------------------------------------------------------4-114 

 

4.10.5  BASIC Expansion Mode (EXPAND MODE)--------------------------------------------------------------4-114 

5.  SYSTEM MODE (For users, available menu items are limited.) ------------------------------------ 5- 1 

  5.1  Flowchart of System Mode (For users) -----------------------------------------------------------------------5- 1 
  5.2  LCD Display at Starkup -------------------------------------------------------------------------------------------5- 2 
 5.3  Flowchart of Self Test ---------------------------------------------------------------------------------------------5- 3 
 5.4  Flowchart of Mode Setting----------------------------------------------------------------------------------------5- 3 
  5.5  Flowchart of Printer Parameter Fine Adjustment Setting-------------------------------------------------5- 4 
 5.6  Flowchart of Test Print --------------------------------------------------------------------------------------------3- 6 

6.  OPERATION DURING BATTERY CHARGE BY AC POWER SUPPLY ----------------------------- 6- 1 

  6.1  IN PRINTER POWER OFF STATE----------------------------------------------------------------------------6- 1 
  6.2  IN PRINTER POWER ON STATE -----------------------------------------------------------------------------6- 1 

7.  PROGRAM DOWN LOAD MODE ------------------------------------------------------------------------------ 7- 1 

  7.1  General Description ------------------------------------------------------------------------------------------------7- 1 
  7.2  Software Installatin -------------------------------------------------------------------------------------------------7- 1 

 7.2.1 

Software 

Requirement s ---------------------------------------------------------------------------------------- 7- 1 

 7.2.2 

Setup----------------------------------------------------------------------------------------------------------------- 7- 2 

  7.3  Starting Up And Exiting The Download Program For B-EP ---------------------------------------------7- 3 

 

7.3.1  Starting Up The Download Program For B-EP ------------------------------------------------------------ 7- 3 

 

7.3.2  Exiting The Download Program For B-EP ------------------------------------------------------------------ 7- 3 

 7.4  Transmission Conditions Settings------------------------------------------------------------------------------7- 4 

 7.4.1 

Transmission Conditions---------------------------------------------------------------------------------------- 7- 4 

  7.5  Downloading The Firmware To The Printer------------------------------------------------------------------7- 5 

 7.5.1 

Selecting 

The Firmware ----------------------------------------------------------------------------------------- 7- 5 

  7.6  Downloading The Firmware--------------------------------------------------------------------------------------7- 6 

 7.6.1 

Preparation 

of Printer -------------------------------------------------------------------------------------------- 7- 6 

 7.6.2 

Download 

by USB ------------------------------------------------------------------------------------------------ 7- 6 

 7.6.3 

Download 

by 

IrDA(TEC) ---------------------------------------------------------------------------------------- 7- 8 

 7.6.4 

Download 

by 

IrDA(IrCOMM) ----------------------------------------------------------------------------------- 7- 9 

 
 
 

CAUTION! 

1.  This manual may not be copied in whole or in part without prior written permission of TOSHIBA 

TEC. 

2.  The contents of this manual may be changed without notification. 
3.  Please refer to your local Authorised Service representative with regard to any queries you may 

have in this manual.  

Copyright © 2005 
by TOSHIBA TEC CORPORATION 
All Rights Reserved 
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN

Summary of Contents for B-EP2DL Series




































































































































































Reviews:

No comments

Related manuals for B-EP2DL Series

Canon iPF650 - imagePROGRAF Color Inkjet Printer Basic Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 40
Canon iP90 - PIXMA Color Inkjet Printer Easy Setup Instructions preview
iP90 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon iPF650 - imagePROGRAF Color Inkjet Printer Install Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 16
Canon iP100 - PIXMA Color Inkjet Printer Setup Instructions preview
iP100 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual preview
imageRUNNER ADVANCE C5560
Brand: Canon Pages: 67
Canon imageRUNNER 3300 Reference Manual preview
imageRUNNER 3300
Brand: Canon Pages: 366
Canon IMAGERUNNER ADVANCE C5051 Getting Started preview
IMAGERUNNER ADVANCE C5051
Brand: Canon Pages: 252
Canon iPF710 - imagePROGRAF Color Inkjet Printer Operations preview
iPF710 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 2
Xerox 770 Safety Manual preview
770
Brand: Xerox Pages: 24
YOUPAI MAX Product Instruction Manual preview
MAX
Brand: YOUPAI Pages: 15
TallyGenicom 5040 Quick Start Manual preview
5040
Brand: TallyGenicom Pages: 15
Oki OKIFAX 5050 Handbook preview
OKIFAX 5050
Brand: Oki Pages: 98
Oki OKIPAGE 8p Plus Setup Manual preview
OKIPAGE 8p Plus
Brand: Oki Pages: 18
OmniPrint FreeJet320 TX User Manual preview
FreeJet320 TX
Brand: OmniPrint Pages: 44
Katun C5000-series Installation Instructions preview
C5000-series
Brand: Katun Pages: 2
ICT GP83 Service Manual preview
GP83
Brand: ICT Pages: 34
Oki MPS730b Manual De L'Utilisateur preview
MPS730b
Brand: Oki Pages: 143
oti OCT Service Manual preview
OCT
Brand: oti Pages: 33

Brands by name

Popular brands

Load more brands