4. SYSTEM MODE (For Service Persons and System Administrators)
EO13-33005
4.9 Interface Setting
4- 85
4.9.5 Bluetooth Setting
(1) Device Nickname for Assembly Process Test Setting
This setting is to identify the device nicknames.
Notes:
1. When set to “ON”, the device nickname is “FACTORY TEST”.
2. When set to “OFF”, the device nickname is “TOSHIBA TEC BT”.
3. When
the
[FEED]
key is pressed, the menu moves in the opposite direction from when the
[PAUSE]
key is pressed.
4. When
the
[FEED]
and
[PAUSE]
keys are simultaneously pressed, the display returns to the system
mode menu.
5. When
the
[FEED]
key or
[PAUSE]
key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
6. The change in the parameter setting becomes effective when the
[POWER]
key is pressed after
setting, then stored in the backup memory.
(2) Inquiry Scan Time Setting (INQUIRY)
This setting is to inquiry scan time.
Notes:
1. When
the
[FEED]
key is pressed, the menu moves in the opposite direction from when the
[PAUSE]
key is pressed.
2. When
the
[FEED]
and
[PAUSE]
keys are simultaneously pressed, the display returns to the system
mode menu.
3. When
the
[FEED]
key or
[PAUSE]
key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the
[POWER]
key is pressed after
setting, then stored in the backup memory.
FACTORY TEST OFF
[FEED]
[PAUSE]
FACTORY TEST ON
Device nickname for assembly process test is not used.
(Factory default)
Device nickname for assembly process test is used.
INQUIRY EVERY
[FEED]
[PAUSE]
INQUIRY OFF
EVERY (Factory default)
Inquiry scan is OFF
INQUIRY 60sec
60 second
