4. SYSTEM MODE (For Service Persons and System Administrators)
EO13-33005
4.9 Interface Setting
4- 108
(22) 802.11g Channel Setting (802.11g CHANNEL)
Notes:
1. When
the
[FEED]
key is pressed, the menu moves in the opposite direction from when the
[PAUSE]
key is pressed.
2. When
the
[FEED]
and
[PAUSE]
keys are simultaneously pressed, the display returns to the system
mode menu.
3. When
the
[FEED]
key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the
[POWER]
key is pressed after
setting, then stored in the backup memory.
5. When a channel, which cannot be used in the country where the printer is going to be shipped, is
selected, the channel is changed to the one which can be used in that country. For the channels which
can be used for each country, refer to next page.
802.11b CHANNEL
802.11g CHANNEL 1
IEEE802.1b channel setting
[POWER]
Selected to channel 1 (Factory default)
[PAUSE]
802.11g CHANNEL 2
Selected to channel 2
[PAUSE]
802.11g CHANNEL 3
Selected to channel 3
[PAUSE]
802.11g CHANNEL11
Selected to channel 11
[PAUSE]
802.11g CHANNEL12
Selected to channel 12
[PAUSE]
802.11g CHANNEL13
Selected to channel 13
[PAUSE]
