4. SYSTEM MODE (For Service Persons and System Administrators)
EO13-33005
4.4 Parametr Setting
4- 27
4.4.2 LCD Density Setting (LCD DENSITY)
This setting is to adjust the LCD display density. (Factory Default is 0)
Notes:
1. When the
[FEED]
key is pressed, the menu moves in the opposite direction from when the
[PAUSE]
key
is pressed.
2. When the
[FEED]
and
[PAUSE]
keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the
[FEED]
key or
[PAUSE]
key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the
[POWER]
key is pressed after setting,
then stored in the backup memory.
LCD DENSITY -5
[PAUSE]
LCD DENSITY -4
[PAUSE]
LCD DENSITY -3
[PAUSE]
LCD DENSITY +3
[PAUSE]
LCD DENSITY +4
[PAUSE]
LCD DENSITY +5
[PAUSE]
Light
Drak
