3 - 2 3 - 2
MELSEC-A
3 SPECIFICATION
3.2 Performance Specification
Table 3.2 indicates the performance specifications of the AJ65VBTCU-68ADVN/ADIN.
Table 3.2 Performance specification
Item AJ65VBTCU-68ADVN AJ65VBTCU-68ADIN
Protection class
IP1XB
Voltage
–10 to 0 to +10V DC (input resistance 1M )
⎯
Analog input
Current
⎯
0 to 20mA DC (input resistance 250 )
Digital output
16-bit signed binary (-4096 to +4095)
16-bit signed binary (-96 to +4095)
Accuracy
Analog input range
Digital output
Ambient
temperature
0 to 55°C
Ambient
temperature
25±5°C
Max.
Resolution
-10 to +10V
User range setting 1
(-10 to +10V)
-4000 to +4000
2.5mV
0 to 5V
1.25mV
1 to 5V
AJ65VBTCU-
68ADVN
(Voltage)
User range setting 2
(0 to 5V)
0 to 4000
1.0mV
0 to 20mA
5µA
4 to 20mA
AJ65VBTCU-
68ADIN
(Current)
User range setting
(0 to 20mA)
0 to 4000
±0.3%
(±12 digit )
±0.2%
(±8 digit )
4µA
I/O characteristics, maximum
resolution, accuracy (accuracy
relative to maximum value of
digital output value)
: digit indicates digital value.
Maximum conversion speed
1ms/channel
Absolute maximum input
Voltage ±15 V
current ±30mA
Analog input points
8 channels/module
CC-Link station type
Remote device station (ver. 1 remote device station or ver. 2 remote device station)
Number of occupied stations
Ver. 1 remote device station (ver. 1 compatible slave station) setting:
3 stations
Ver. 2 remote device station (ver. 2 compatible slave station) setting:
1 station (Expanded cyclic setting: Quadruple)
Communication cable
Ver. 1.10 compatible CC-Link dedicated cable: FANC-110SBH, FA-CBL200PSBH, CS-110
Specific isolated area
Isolation
method
Dielectric
withstand voltage
Insulation resistance
Across communication system terminals
and all analog input terminals
Photocoupler
isolation
Across power supply system terminals
and all analog input terminals
Transformer
isolation
500V AC for 1
minute
5M or higher,
measured with 500V
DC insulation
resistance tester
Between channels
Not isolated
-
-
Isolation specifications
Noise durability
By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
External wiring system
One-touch connector for communication [Transmission circuit]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for power supply and FG [Unit power supply and FG]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for analog I/O
(4 pins pressure welding type, the plug for the connector is sold separately)
<Sold separately>
Online connector for communication: A6CON-LJ5P
Online connector for power supply: A6CON-PWJ5P
One-touch connector
for communication
Communication line: Ver. 1.10 compatible CC-Link dedicated cable
0.5mm
2
(AWG#20) [ 2.2 to 3.0], shielded wire 0.5mm
2
(AWG#20)
One-touch connector
for power supply/FG
0.66 to 0.98 mm
2
(AWG#18) [ 2.2 to 3.0]
Wire diameter 0.16 mm or more
Applicable
wire size
One-touch connector
for analog I/O
1.0 to 1.4 (A6CON-P214), 1.4 to 2.0 (A6CON-P220) [Applicable cable size: 0.14 to 0.2 mm
2
]
1.0 to 1.4 (A6CON-P514), 1.4 to 2.0 (A6CON-P520) [Applicable cable size: 0.3 to 0.5 mm
2
]
TH35-7.5Fe, TH35-7.5Al (conforming to JIS C 2812)
Applicable DIN rail
CC-Link connector type metal installation fitting: A6PLT-J65V1
24V DC (20.4V to 26.4V DC, ripple factor within 5%)
Inrush current: 4.2A, within 1.2ms
External power supply
Current consumption 0.10A
Weight
0.17kg
3
