Toshiba 4580, Service Manual

Page: 73 / 379

6570/5570 DISPLAY UNIT 5 - 2 Mar. 1999 © TOSHIBA TEC
No. Message
1 WAIT WARMING UP
2 READY
3 COPYING
4 WAIT 30 SEC FOR
WARMING UP
5 PLACE NEXT
ORIGINAL
6
Fig. 5.2-1
Conditions of machine
Being warmed up
•
Indicated after the main switch is
switched ON up until the machine
becomes capable of copying.
Capable of copying.
•
Indicated when the machine is
capable of copying and the
operator’s instructions for copying
conditions are awaited.
•
Returns to the initial condition if no
key input is given for 45 seconds.
Now copying.
•
Indicated by pressing the START
key.
•
Copy quantity indicator becomes
“1” and copying is completed.
Energy saving conditions.
ADU 1-sided copying standby state.
Timer OFF
•
No message is displayed in the
display panel.
•
Timer LED is turned ON.
Notes
•
The number and reproduction ratio of
copies are indicated, for example, as
“0”, “100%” when the main switch
comes ON.
•
Copy quantity indicator indicates as
“1”. When a digital key is pressed, the
set number is indicated.
•
The set number is cleared to “1” by
pressing the CLEAR/STOP key.
•
Manual copying is possible.
•
After completion of copying, the copy
quantity indicator returns to the
initially set number.
•
Released by pressing the ENERGY
SAVER key or the START key.
•
When using ADU 1-sided, and when
not using ADF.
•
Press the START key to clear.
5.2 Items Shown on the Display Panel
5.2.1 Display during normal copying
C