Toshiba 4580, Service Manual

Page: 298 / 379

Mar. 1999 © TOSHIBA TEC 16 - 7 6570/5570 ADF
(5) Aligning sensor OFF to timing sensor OFF
At the point when the timing sensor turns OFF and the trailing edge of the original is detected, the
feed motor stops.
The number of drive pulses until the feed motor stops is set.
(6) Setting the original at the exposure position (completion of feed)
The original stops signal is set by the set timing of the original stop signal.
After the timing sensor detects the trailing edge of the original, the original is transported for a speci-
fied number of pulses. At the point when the original arrives at the exposure position, the feed motor
stops, the original is set at the exposure position, and feed is completed.