Toshiba 4580, Service Manual

Page: 289 / 379

Mar. 1999 © TOSHIBA TEC 15 - 21A 8070/6570/5570/4580 ADU
(5) Remove the E-ring, arm, pin and bush from the
removed ADU/exit switching gate, and replace
the gate.
[Z] Gate solenoid
(1) Remove the 4 screws fixing the exit cover, and
then remove the exit cover.
(2) Remove the screw fixing the link to the gate
arm.
(3) Disconnect the connector, and remove the 2
screws fixing the gate solenoid. Then remove
the gate solenoid.
[AA] Reversal gate
(1) Open the exit unit.
(2) Remove the E-ring fixing the reversal gate.
Then remove the arm, spring and bush.
(3) Slide the reversal gate to the rear and remove
it.
[AB] Exit roller
(1) Remove the exit cover.
(2) Remove the rear E-ring, and slide the bearing
to the inside of the frame.
(3) Slide the exit roller to the rear and remove the
bearing from the frame, and then take out the
exit roller.
Arm
Bush
E-ring
Gate solenoid
Reversal
gate
Arm
Spring
Exit roller
E-ring
Mar. 1999 © TOSHIBA TEC 15 - 23 8070/6570/5570/4580 ADU