22
Using the TV’s features
2
Press
V
or
U
to select
No Signal Power Down
and press
Q
.
3
Press
V
or
U
to select the item you want to
change and press
Y
or
Z
to select
On
or
Off
.
Notes:
•
Default setting is all
On
.
•
A warning message will appear 1 minute before
turning off .
Viewing the Software Licences
The licences for the software used in this TV are
available for viewing on screen.
1
From the
SETUP
menu, press
V
or
U
to select
Software Licences
.
2
Press
Q
.
A screen will appear displaying all of the
licencing information required for the TV’s
software.
Confi rming software version
1
From the
SETUP
menu, press
V
or
U
to select
System Information
.
2
Press
Q
to display the software version.
System Information
TOSHIBA
2012
Xxx XX 2012 - XX.X.XX.X
MBOOT Version : XXXXXXXX
MFC Version : XXXXXX
Note:
The software version displayed is just for the
illustration.
Resetting the TV
Reset TV will reset all TV settings, including stored
channels, to their original factory values.
1
From the
SETUP
menu, press
V
or
U
to select
Reset TV
.
Auto Tuning
Location
Quick Setup
Software Licences
Manual Tuning
System Information
Reset TV
Home
Auto Tuning
Location
Quick Setup
Software Upgrade
Manual Tuning
Home
SETUP
2
Press
Q
to select.
Activating the 4:3 Stretch
When 4:3 stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the
Display Settings
menu, press
V
or
U
to select
4:3 Stretch
.
2
Press
Y
or
Z
to select
On
or
Off
.
Note:
This feature is not available when
Auto Format
is set
to
Off
.
Panel Lock
Panel Lock
disables the buttons on the TV. All
buttons on the remote control can still be used.
1
From the
PREFERENCES
menu, press
V
or
U
to
select
Panel Lock
.
2
Press
Y
or
Z
to select
On
or
Off
.
Note:
When
Panel Lock
is
On
, a reminder will appear when
the keys on the TV are touched. If the standby key is
touched, the TV will switch off and can only be brought
out of standby by using the remote control.
Setting the Automatic Power Down
The TV will automatically turn itself off (standby)
after approximately 4 hours, if you do not operate
the control buttons on the remote control or on the
TV control panel.
1
From the
PREFERENCES
menu, press
V
or
U
until
Energy Saving Settings
is selected, and
then press
Q
.
2
Press
V
or
U
to select
Automatic Power
Down
, press
Y
or
Z
to select
On
or
Off
, and
then press
EXIT
.
Note:
1 minute before switching to standby, a warning
message will appear.
Setting No Signal Power Down
The TV will automatically turn itself off after 15
minutes when no signal is detected. You can change
the setting to Off for the following purposes:
•
Low signal strength of analog channel (no signal
detection).
•
Only Audio L/R is connected to an external
input in order to listen to music through the TV
speakers.
1
From the
Energy Saving Settings
menu, press
Q
.
4046VL20̲Series1̲En.indd 22
2012/02/28 14:44:57
Summary of Contents for 40VL20 Series
Page 60: ......
