Toshiba 40VL20 Series, Owner'S Manual

Page: 18 / 60

18
Using the TV’s features
Activating the picture preferences
You can customise current Picture Mode settings as
desired. For example, while selecting " Dynamic ", if
you change the following items, such as Backlight ,
Contrast , Brightness , Colour , Tint , Sharpness , and
the Advanced Picture Settings items, your new
setting are saved for " Dynamic " Picture Mode .
1
From the PICTURE menu, press
V
or
U
to
select either Backlight , Contrast , Brightness ,
Colour , Tint or Sharpness .
2
Press
Y
or
Z
to adjust the settings as desired.
Setting the Black/White Level
Black/White Level improves the defi nition of dark
areas of the picture.
1
From the PICTURE menu, press
V
or
U
to
select Advanced Picture Settings .
2
Press
V
or
U
to select Black/White Level .
PICTURE
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor
Active Backlight Control
Noise Reduction
ClearScan 100 Pro
3D Colour Management
Advanced Picture Settings
Off
Off
On
High
Black/White Level
Middle
3
Press
Y
or
Z
to select Middle , High , Off or
Low .
Using the ClearScan 100 Pro
This feature will reduce picture blur without
decreasing image brightness or adding fl icker.
1
From the Advanced Picture Settings menu,
press
V
or
U
to select ClearScan 100 Pro .
2
Press
Y
or
Z
to select High , Middle , Standard
or Off .
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
1
From the Advanced Picture Settings menu,
press
V
or
U
to select Colour Temperature ,
then press
Q
.
2
Press
Y
or
Z
to select Cool , Natural , or Warm
to suit your preference.
Colour Temperature
Colour Temperature Cool
Red Level
Green Level
Blue Level
Reset
0
0
0
3
Press
V
or
U
to select Red Level , Green Level
or Blue Level , then press
Y
or
Z
to adjust the
setting as required.
Resetting the Colour Temperature
This function resets your colour temparature
settings to the factory settings.
1
From the Colour Temperature menu, press
V
or
U
to select Reset , then press
Q
.
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
1
From the Advanced Picture Settings menu,
press
V
or
U
to select Noise Reduction , and
then press
Q
.
Noise Reduction
Auto NR On
MPEG NR Auto
DNR Auto
2
Press
V
or
U
to select Auto NR , and then press
Y
or
Z
to select On or Off .
Off mode :
MPEG NR
menu and DNR menu are available.
• MPEG NR mode: Low , Middle , High or Off
• DNR (Digital Noise Reduction) mode: Low ,
Middle , High or Off
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments :
Red ,
Green , Blue , Yellow , Magenta or Cyan .
1
From the Advanced Picture Settings
menu, press
V
or
U
to select 3D Colour
Management .
2
Press
Y
or
Z
to select On .
3D Colour Management On
3
Press
V
or
U
to select Base Colour
Adjustment .
4046VL20̲Series1̲En.indd 18 2012/02/28 14:44:57