40
Connecting your TV
Connecting an HDMI or a DVI
device
•
When turning on your electronic components, turn on
the TV first, and then the HDMI or DVI device.
•
When turning off your electronic components, turn off
the HDMI or DVI device first, and then the TV.
•
This TV may not be compatible with features and/or
specifications that may be added in the future.
•
Some early HDMI equipment may not work properly
with your latest HDMI TV, due to the adoption of a
new standard.
•
This TV is only operable with L-PCM on 32/44. 1/48
kHz and 16/20/24 bits.
Connecting an HDMI or a DVI device
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI device or
uncompressed digital video from a DVI device.
This input is designed to accept HDCP programme
material in digital from EIA/CEA-861/861B compliant
consumer electronic devices (such as a set top box or
DVD player with HDMI or DVI output).
For acceptable video signal formats
(
page 43
Acceptable Video signals through HDMI terminals
).
The HDMI input is designed for best performance with
1080i high-definition video signals, but will also accept
and display VGA, SVGA, XGA, WXGA, SXGA, 480i,
480p, 576i, 576p, 720p, and 1080p signals.
•
HDMI
: High-Definition Multimedia Interface
•
DVI
: Digital Video Interface
•
HDCP
: High-bandwidth Digital Content Protection
•
EIA/CEA-861/861B compliance covers the
transmission of uncompressed digital video with high-
bandwidth digital content protection, which is being
standardized for reception of high-definition video
signals. Because this is an evolving technology, it is
possible that some devices may not operate properly
with the TV.
•
E-EDID
: Enhanced-Extended Display Identification
Data
•
L-PCM
: Linear-Pulse Code Modulation
Connecting an HDMI device
One HDMI cable (type A connector)
HDMI out
TV back view
HDMI device
TV side view
For proper operation, it is recommended that you use a
short HDMI cable with the HDMI Logo
(
)
.
HDMI cable transfers both video and audio.
Note: It is possible that some HDMI device may not
operate properly with this TV.
Connecting a DVI device
One HDMI (type A connector)-to DVI adapter cable
and audio cables
TV back view
TV side view
HDMI device
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 3m. The recommended
length are 2 metres.
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analogue audio cables are required.
Note: When connecting a DVI device, please connect to
the HDMI 1 port only.
Summary of Contents for 32AV800AZ
Page 50: ...1506 0GLM000 ...
