Toshiba 32AV800AZ, Owner'S Manual

Page: 29 / 50

29
Using the TV’s features (General)
The available functions are dependent on the equipment
connected. Not all the remote control keys may be
available. Please refer to the operation manual for each
piece of equipment connected.
Note: The television features that can be controlled
by the connected equipment are: Standby, Volume,
Channel, Sound Mute, Display Information, Number
Buttons and Previous Programme.
Input Source Selection
When any equipment using CEC technology is
connected, the REGZA-LINK icon will appear in the input
source list allowing selection of individual devices.
1. Press . A list will appear on screen showing
modes and all stored external equipment.
2. The REGZA-LINK icon appears automatically after
detected with REGZA-LINK compatible equipment.
Press ▼ to highlight the input source shown with the
REGZA-LINK icon.
Inputs
REGZA−LINK
TV
1
2
3C
HDMI1
HDMI2
PC
>>
3.
Press ►. A second selection screen will appear
showing all connected REGZA-LINK equipment.
4.
Press ▲ or ▼ to highlight an input source, and then
press to select.
Notes:
•
When the television is switched on, it will take a few
minutes for the REGZA-LINK icon to appear in the
list, when an HDMI cable is removed, it will take a
few minutes for the logo to disappear.
•
If the HDMI cable from the connected equipment is
changed, or HDMI equipment settings are changed,
the Enable REGZA-LINK in the REGZA-LINK Setup
menu may need to be reset to On.
•
When the REGZA-LINK input source is selected,
some REGZA-LINK equipment may automatically
switch on.
The following features are dependent on the connected
equipment. For operating information, refer to the
operation manual for all connected equipment.
Pass-Through Control
The Pass-Through feature allows you to control the
connected REGZA-LINK device by the television’s
remote control.
1.
Press ▲ or ▼ to select REGZA-LINK in the Quick
Access Menu, and then press . The control panel
will appear.
When there are two or more REGZA-LINK devices
connected to the television, a device selection menu
will appear. Highlight the device you want to control,
and then press
to select.
GUIDE EXIT
MENU
MENU
CONTENTS ROOT TOP DVD
RETURN
2. Press the key on the television’s remote control as
guided by the control panel shown.
Note: The available functions are dependent on the
connected equipment, not all the remote functions may
be available. Please refer to the operation manual of the
connected equipment.
REGZA-LINK Menus
By activating the Enable REGZA-LINK feature in the
REGZA-LINK setup menu, individual REGZA-LINK
features can then be activated.
One Touch Play
The function of REGZA-LINK will automatically power on
the television that was in standby mode and switch the
television’s input source to the port connected with the
audio/video equipment by powering-on or playing from
the audio/video equipment.
Note: This feature is dependent on the connected
equipment and television setting.
System Standby
This feature automatically switches the connected
equipment into standby when the television goes into
standby and conversely for the television to switch into
standby when connected equipment goes into standby. It
is selected in the
REGZA-LINK Setup menu.
Note: This feature is dependent on the connected
equipment and television setting.
System Audio Control
Using the Speaker Preference feature allows the
televisions remote control to adjust the volume or mute
the sound of the speakers connected to the television via
an AV amplifier.