Toshiba 32AV800AZ, Owner'S Manual

Page: 37 / 50

37
Connecting your TV
Back Connections
Connection example:
TV back view
1
2
3
4
VCR(Recording)
Set Top Box
HDMI or DVI device
DVD video player
(with component video
outputs)
TV back view
32AV800AZ | 40LV800AZ
32EL800AZ | 42HL800AZ
1
4
2 3
4
1
4
2 3
4
•
Before connecting any external equipment, turn off
all main power switches. If there is no switch, remove
the mains plug from the wall socket.
•
The unauthorized recording of television
programmes, DVDs, video tapes and other materials
may infringe upon the provisions of copyright law.
•
The COMPONENT VIDEO INPUT consists of three
component video signals ( Y, P
B
/C
B
, P
R
/C
R
) and
provides the best picture performance. Y input could
also be used for a standard (composite) video.
•
Additional equipment and cables shown are not
supplied with this TV.
•
TV OUTPUT
That will only support ATV/DTV signal to display out
or by VCR TV signal recording use.
Connecting an audio system
You can enjoy high quality dynamic sound by connecting
the TV to an audio system.
Notes:
•
DO NOT connect the DIGITAL AUDIO output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
•
Connect the DIGITAL AUDIO output terminal to the
Coaxial input of a Receiver or Processor.
•
Refer to the owner’s manual of the connected
equipment as well.
•
When you connect the TV to other equipment, be
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
•
The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio amplifier’s volume
to a moderate listening level before turning on the
power. Otherwise, the speakers and your hearing
may be damaged by a sudden high volume sound.
•
Turn off the amplifier before you connect or
disconnect the TV’s power cord. If you leave the
amplifier power on, the speakers may be damaged.
Warning:
When you are connecting (via the DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital or MPEG decoding function, be sure to set
PCM in SPDIF Type under SOUND menu. Otherwise,
the speakers and your hearing may be damaged by a
sudden high volume sound.
Connecting your TV