16
Getting started
Turning on the TV
Switching on the TV
Connect the power cord to a wall outlet, the
power
indicator lights in red (standby mode).
1. Press
on the remote control or
on the TV
control panel, the
power indicator lights in green.
Switching off the TV
1. Press
on the remote control or
on the TV
control panel to switch to the standby mode.
Notes:
•
This TV is not fully disconnected from the main
supply, as minute current is consumed even when the
TV is turned off. When the TV will not be used for a
long period of time, such as during vacation or travel,
remove the power plug from the wall outlet.
•
If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power
is going to be off for a long time and you are going
to be away from your TV, unplug the power cord to
prevent the TV from turning on in your absence.
Quick Setup
Before switching on the TV, put your decoder and media
recorder to
Standby
if they are connected and ensure
the antenna is connected. To setup the TV, use the
buttons on the remote control. (
page 14
Learning
about the remote control
)
1. Connect the television to the main power and press
the POWER
button. The Quick Setup screen will
appear at the first use.
2.
Press ◄ or ► to select the Location and press
to
the next step.
Location
To use the TV for the display in a store showroom
please select [Store]
[Home] mode is recommended for normal use.
Home
Auto Tuning
OK
Back
RETURN
Select
3.
Press ◄ or ► to select the Tuning Mode.
Back
RETURN
Edit
Auto Tuning
OK
Tuning Mode
Start Scan
Previous setting will be lost!
Press Exit for no change.
ATV and DTV
!
4.
To start channel scan, use ▲ or ▼ to select Start
Scan and press
.
Auto Tuning
ATV
DTV
20%
0%
0
0
Progress (%)
Found
Stop
EXIT
The search will begin for all available stations. The slide
bar will move along the line as the search progresses.
Note: If you skip this step, the channel scan can still be
performed later in the Setup Menu.
Summary of Contents for 32AV800AZ
Page 50: ...1506 0GLM000 ...
