Toro Z593-D Z Master 74264TE, Operator'S Manual

Page: 44 / 80

Changing the Engine-Oil Filter
Service Interval: After the first 50 hours
Every 200 hours
1. Drain the oil from the engine; refer to Draining the
Engine Oil (page 43) .
2. Change the engine-oil filter ( Figure 59 ).
g032649
g032644
Figure 59
3. Add oil; refer to Checking the Engine-Oil Level (page
42) .
Changing the Engine Oil
Service Interval: After the first 50 hours
Every 100 hours
1. Start the engine and let it run for 5 minutes.
Note:
This warms the oil so it drains better.
2. Park the machine on a level surface.
3. Disengage the blade-control switch (PTO), move the
motion-control levers to the N
EUTRAL
-
LOCK
position,
and engage the parking brake.
4. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
5. Place a pan below the oil drain. Remove the drain plug
and let the oil drain completely (
Figure 60 ).
6. Remove the oil filler cap from the top of the engine
(
Figure 62 ).
Note:
This helps the oil to drain.
7. Install the drain plug and tighten it to 35 N∙m (25-1/2
ft-lb).
Note:
Dispose of the used oil at a recycling center.
g001058
Figure 60
1. Back of the machine 2. Drain plug
44