Glow-Plug Switch
This switch activates the glow plugs and is indicated by the
glow-plug light. Hold down the glow-plug switch for 10
seconds prior to starting the machine.
Temperature Light
The temperature light comes on when the engine is over
heating (
).
Audible Alarm
This machine has an audible alarm that alerts the user to shut
off the engine; otherwise, engine damage can occur from
over heating. Refer to
Operating with the Overheat Sensor
(page 30)
.
Fuel-Selector Valve
The fuel-selector valve is located behind the seat.
Close the fuel-selector valve when transporting or storing
mower.
Move the selector valve to the left or right position for
operation.
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro genuine
parts. When it comes to reliability, Toro delivers replacement
parts designed to the exact engineering specification of our
equipment. For peace of mind, insist on Toro genuine parts.
Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to operate or
service the machine. Local regulations may restrict the
age of the operator. The owner is responsible for training
all operators and mechanics.
•
Become familiar with the safe operation of the equipment,
operator controls, and safety signs.
•
Know how to stop the machine and shut off the engine
quickly.
•
Check that operator-presence controls, safety switches,
and shields are attached and functioning properly. Do not
operate the machine unless they are functioning properly.
•
Evaluate the terrain to determine the appropriate
equipment and any attachments or accessories required to
operate the machine properly and safely.
•
Do not operate the machine without an attachment
installed on the front of the machine.
Fuel Safety
•
To avoid personal injury or property damage, use extreme
care in handling fuel. Fuel vapors are flammable and
explosive.
•
Extinguish all cigarettes, cigars, pipes, and other sources
of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or add fuel to the fuel tank
while the engine is running or while hot.
•
Do not refuel the machine indoors.
•
Do not store the machine or fuel container where there
is an open flame, spark, or pilot light, such as on a water
heater or on other appliances.
•
Do not fill containers inside a vehicle or on a truck or
trailer bed with a plastic liner. Always place containers on
the ground, away from your vehicle before filling.
•
Remove the equipment from the truck or trailer and
refuel it while it is on the ground. If this is not possible,
then refuel from a portable container rather than a
fuel-dispenser nozzle.
•
Do not operate the machine without the entire exhaust
system in place and in proper working condition.
•
Keep the fuel-dispenser nozzle in contact with the rim of
the fuel tank or container opening at all times until fueling
is complete. Do not use a nozzle lock-open device.
15
Summary of Contents for Z593-D Z Master 74264TE
Page 75: ...Schematics g012068 g012068 Wire Diagram Rev A 75 ...
Page 76: ...Notes ...
Page 77: ...Notes ...
Page 78: ...Notes ...